ArmourSeal Sealer Stripper

Armourseal Sealer Stripper box.jpg
Armourseal Sealer Stripper box.jpg

ArmourSeal Sealer Stripper


ArmourSeal Sealer Stripper is a heavy-duty, fast-acting formulation, designed to soften and break down old and or unwanted coatings from concrete.

It is recommended that this product be used outdoors and that you work on small areas at a time (10-20m2).

Apply generously with a roller or brush and, using a medium-bristled broom, massage the stripper into the area. Leave for 10 minutes then use a pressure washer to remove.

Once dry, check the treated area and repeat the process on any areas where coating remains.

ArmourSeal Sealer Stripper can be rinsed with water.

It is recommended the area treated is completely dry before commencing any resealing work.

Add To Cart
Sealer Stripper 01.jpg

Health & Safety
• Avoid breathing vapour – wear organic vapour respirator meeting the requirements of AS1715 and AS1716.

• Provide good ventilation – open windows and doors and use circulating fans.

• Wear eye protection.

• Avoid contact with skin – wear PVC or neoprene gloves.

• If product is splashed on the skin, wash off immediately before it dries.

• Keep out of reach of children.

Contact a doctor or Poisons Information Centre. Do not induce vomiting. Give water to drink.

Eye: Gently flush with running water, holding eyelids open for 15 minutes. Seek medical attention.

Skin: Remove contaminated clothing and gently flush affected areas with soap and water. Seek medical attention if irritation develops.

Inhalation: Remove victim from exposure, into fresh air. Apply artificial respiration if victim has stopped breathing. Seek medical attention.