ArmourSeal Hydrochloric Acid

Armourseal Acid Square.jpg
Armourseal Acid Square.jpg

ArmourSeal Hydrochloric Acid

0.00

DESCRIPTION

AmourSeal Hydrochloric Acid is used for cleaning & etching concrete surfaces, prior to sealing with ArmourSeal Concrete Sealant.

DESCRIPTION FOR ACID WASHING

  • 1.8 Litres of acid to 18 litres of water is an industry standard dilution ratio for new exposed aggregate.

  • Contact all of the concrete with a broom, as the acid is applied.

  • Ensure surface is completely dry before application.

  • Ensure acid is applied to ground evenly. Watering cans are ideal.

  • Never acid wash going down hill always up hill.

FOR FURTHER TECHNICAL ASSISTANCE CALL 1800 779 007 IN AN EMERGENCY DIAL POLICE OR FIRE BRIGADE.

Quantity:
Add To Cart

SAFETY DIRECTIONS
Avoid contact with skin and eyes. Avoid breathing vapour or spray mist. S36 / 37 / 39 Wear suitable protective clothing, gloves, eye face protection. Additional information is listed in the Safety Data Sheet.

FIRST AID
For advice, contact the Poison Information Centre on 131 126 or a doctor at once.

SWALLOW
If swallowed, DO NOT INDUCE VOMITING.

EYES
If in eyes, hold eyelids apart and flush the eye continuously with running water. Continue flushing until advised to stop by the Poisons Information Centre.

If contact occurs remove contaminated clothing and flush skin and hair with running water.

Technical advise or MSD
Call (08) 9455 1144

Hydrochloric Acid 01.jpg