The RAPIDTOOL ICARO PRC-26X Premium Rebar Cutter is a heavy-duty industrial rebar cutting machine engineered for demanding precast, rebar processing, fabrication and construction environments. Designed and manufactured in Europe and supported locally in Australia, the PRC-26X combines robust construction, high cutting capacity and multi-bar processing for high-volume production.

With a 6–26mm cutting capacity, the PRC-26X can process a single 26mm bar or multiple smaller bars simultaneously, helping improve productivity and reduce processing time. Its powerful 2.2kW three-phase motor is designed for continuous, high-output operation under load.

The machine features hand lever and foot lever controls, full safety guarding and an industrial-strength frame designed for long-term durability. Integrated wheels also make it easier to relocate the machine around a workshop or production facility.

RAPIDTOOL is the exclusive Australian, New Zealand and Pacific Islands dealer and authorised service agent for ICARO rebar machinery, providing local access to spare parts, technical support and servicing.

Key Features & Benefits

• Premium heavy-duty rebar cutting machine

• 6–26mm cutting capacity

• 400–415V three-phase electrical supply

• Powerful 2.2kW heavy-duty motor

• Designed for continuous, high-output production

• Multi-bar cutting capability for increased productivity

• Fast and clean rebar cuts

• Hand lever and foot lever operation

• Full safety guarding for operator protection

• Industrial-strength frame for durability and long service life

• European engineering and manufacturing

• Tested in Australia and New Zealand using rebar manufactured to national standards

• Supplied with wheels for easier machine relocation

• Local Australian spare parts, servicing and technical support

Multi-Bar Cutting Capacity

The PRC-26X is designed to process multiple reinforcing bars simultaneously, depending on bar diameter:

• 26mm – 1 bar

• 18mm – 2 bars

• 14mm – 3 bars

This multi-bar capability makes the PRC-26X particularly suitable for production environments where fast, repeatable cutting is essential.

Heavy-Duty Three-Phase Motor

The machine is equipped with a 2.2kW three-phase geared drive system designed for demanding production applications. The heavy-duty motor and robust internal components are engineered to provide reliable cutting performance when processing rebar continuously.

With a full-load motor speed of 2,830 RPM and an average cutting cycle speed of approximately 48 RPM, the PRC-26X is built for efficient, high-volume rebar processing.

Safety-First Design

Operator safety is an important part of the PRC-26X design. The machine incorporates full safety guarding and provides both hand lever and foot lever controls, allowing operators to select the control method best suited to their workflow.

The machine should be installed and connected by a licensed electrician before operation. Always follow the manufacturer's installation, operating and safety instructions.

Industrial Construction

Built for demanding workshop and production environments, the PRC-26X features an industrial-strength frame designed to withstand continuous use. Its robust construction makes it suitable for professional rebar processing facilities, precast operations and construction businesses requiring reliable high-volume cutting.

Despite its heavy-duty construction, the machine includes wheels to assist with relocation between workstations where required.

Applications

The RAPIDTOOL ICARO PRC-26X is suitable for:

• Precast concrete production

• Rebar processing facilities

• Rebar fabrication workshops

• Infrastructure construction

• Civil construction

• Commercial construction

• Residential construction

• Steel reinforcement preparation

• High-volume rebar cutting

• General reinforcing steel processing

RAPIDTOOL – ICARO Partnership

RAPIDTOOL and ICARO combine European machine engineering with local Australian support. The PRC-26X has been rigorously tested in Australia and New Zealand using rebar manufactured to applicable national standards.

As the exclusive Australian, New Zealand and Pacific Islands dealer and authorised service agent for ICARO rebar machinery, RAPIDTOOL provides local access to parts, servicing and technical support.

This local support network helps businesses keep their rebar processing equipment operating efficiently while reducing potential downtime associated with sourcing parts and service from overseas.

What's Included

• 1 × RAPIDTOOL ICARO PRC-26X Rebar Cutter

• Wheels

• Priority local service and support

• Australian parts and servicing support

Product Specifications

SpecificationDetailsBrandRAPIDTOOL – ICAROModelPRC-26XDescriptionPremium 400–415V Heavy-Duty 6–26mm Rebar CutterPoles2Rated Voltage400–415V 3~Rated Frequency50HzRated Power2.2kWRated Current4.8ANumber of Phases3Full Load Motor Speed2,830 RPMAverage Cut Cycle Speed48 RPMRated Cutting Diameter6–26mm (650 MPa)Maximum Bar Capacity26mm – 1 bar / 18mm – 2 bars / 14mm – 3 barsNet Weight175kgDimensions (L × W × H)85 × 50 × 60cmAccessoriesWheels

Features and specifications are approximate and subject to change. Refer to the current manufacturer datasheet for complete technical information.

Installation

Installation and electrical connection must be carried out by a licensed electrician. Ensure the machine is installed, earthed and operated in accordance with applicable Australian electrical and workplace safety requirements and the manufacturer's instructions.