Water-Based Resin Concrete Curing Compound

Curecon W is a water-based resin curing compound designed to retain moisture in newly placed concrete, supporting effective curing, strength development and durability. Classified as Type 1D, Class B, it is suitable for a wide range of concrete applications, with particular emphasis on mass concrete structures and major infrastructure projects.

Curecon W is especially suited to applications such as road construction, bridgework and runways, where maintaining appropriate moisture conditions during curing is essential to achieving the intended concrete performance.

With sufficient solids to comply with NSW Roads and Traffic Authority (RTA) specifications, as stated in the product information, Curecon W provides a practical curing solution for specified infrastructure and civil construction applications.

Its rapid film formation and tack-free finish when dry help simplify site operations. By reducing moisture loss from exposed concrete surfaces, Curecon W helps minimise surface shrinkage and cracking while supporting concrete strength development and resistance to dusting.

Key Features and Benefits

• Effective moisture retention: Helps retain moisture in concrete during the curing period.

• Supports concrete strength development: Promotes appropriate curing conditions for concrete performance and durability.

• Helps reduce surface cracking: Reduces moisture loss from exposed surfaces, helping minimise shrinkage-related cracking.

• Improved dusting resistance: Supports improved concrete surface integrity through effective curing.

• Water-based resin formulation: Provides a practical liquid-applied curing solution.

• Rapid film formation: Forms a curing film to help limit moisture evaporation.

• Tack-free when dry: Supports practical site handling once the applied film has dried.

• Suitable for mass concrete: Designed with roadworks, bridgework, runways and other major concrete infrastructure in mind.

• Simplifies curing operations: Can eliminate the need for damp hessian, sand or polythene where the specified curing system is suitable.

• Non-flammable: Identified as non-flammable in the supplied product information.

• Non-toxic classification: Described as non-toxic in the supplied product information; consult the current Safety Data Sheet for handling requirements.

• Air pollution requirements: Volatile ingredients are specified to comply with applicable air pollution requirements for photochemically reactive compounds.

• Environmental rating support: Identified as meeting Green Star rating requirements in the supplied product information.

Recommended Applications

Curecon W is designed for concrete curing applications where effective moisture retention is required, particularly across civil infrastructure and mass concrete construction.

Recommended uses include:

• Road construction and concrete pavements.

• Bridge decks and bridgework.

• Runways and other major concrete transport infrastructure.

• Mass concrete structures.

• General concrete slabs and exposed concrete surfaces.

• Civil engineering and infrastructure projects.

• Concrete applications where reducing premature moisture loss is important.

• Projects where a liquid-applied curing compound can replace traditional wet coverings, subject to the project specification.

Select the appropriate curing system according to the concrete mix, site conditions, specification requirements and intended subsequent treatments.

Reliable Concrete Curing for Infrastructure Projects

Effective curing is essential for helping concrete develop its intended strength, durability and surface properties. Premature moisture loss can interfere with cement hydration and contribute to surface shrinkage, cracking and dusting.

Curecon W forms a curing film that helps retain moisture in exposed concrete. Its suitability for mass concrete and major infrastructure applications makes it a practical option for projects where consistent curing procedures and efficient site operations are important.

For concrete that will receive coatings, overlays or other surface treatments, confirm compatibility and any required surface preparation before proceeding.

Application and Technical Information

Product type: Water-based resin concrete curing compound

Classification: Type 1D, Class B

Primary function: Retains moisture during concrete curing

Suitable applications: General concrete, mass concrete and major infrastructure works

Infrastructure applications: Roadworks, bridgework and runways

Film characteristics: Rapid film formation; tack-free when dry

Flammability: Described as non-flammable in the supplied product information

NSW RTA specifications: Product information states that the solids content is sufficient for compliance with NSW RTA specifications. Confirm the applicable specification and project requirements before use.

Environmental considerations: Product information identifies compliance with relevant requirements for photochemically reactive compounds and Green Star rating requirements. Verify the current supporting documentation for the specific project or rating tool.

Refer to the current Curecon W Technical Data Sheet for application rates, application equipment, timing, drying conditions, curing performance, surface preparation and compatibility with subsequent treatments.

Consult the current Safety Data Sheet for handling, storage, transport and safety requirements.

Need a Concrete Curing Solution for Your Project?

Whether you are constructing roads, bridges, runways or general concrete structures, Curecon W offers a water-based resin curing solution designed to help retain moisture and support concrete strength and durability.

Contact our team for technical documentation, product information and assistance determining whether Curecon W meets your project specifications.

Enquire today at Safari in Canning Vale about Curecon W Type 1D, Class B Curing Compound.