SikaGrout-300 PT AU is a sand-free, zero-bleed cementitious grout for post-tensioning applications. It is aimed at contractors, builders and maintenance teams who need a clearly specified product rather than a generic cement or grout substitute. Safari Group can assist with supply enquiries from Canning Vale for projects across Perth and regional Western Australia.

Typical applications
• bonded post-tensioning ducts
• tight-clearance duct grouting
• filling voids around post-tensioning strands

Why consider SikaGrout-300 PT AU
• two-phase shrinkage compensation
• low permeability and zero bleed
• non-metallic and chloride-free

Product selection should start with the required application, substrate condition, section depth, exposure, finish and project specification. Prepare the substrate carefully and use clean equipment and measured water. Mixing, priming, placement, curing and return-to-service requirements should always follow the current Australian Technical Data Sheet. Perth temperatures can shorten working time, so store materials appropriately and plan mixing and placement before opening bags or packs.

Important: This is a specialist post-tensioning grout. Installation, testing, equipment and acceptance requirements must follow the project specification and current Sika TDS.

Contact Safari Group in Canning Vale to confirm current pack size, stock availability and the latest technical documents. For a faster recommendation, provide the project specification, estimated quantity, substrate, required thickness or gap, application method and site conditions. Where the work is structural, safety-critical or subject to an engineering specification, obtain approval from the project engineer before substituting products or changing the installation method.

FAQ’s

Question: What is SikaGrout-300 PT AU used for?
Answer: SikaGrout-300 PT AU is used for bonded post-tensioning ducts, tight-clearance duct grouting, filling voids around post-tensioning strands. Suitability depends on the substrate, required depth or gap, exposure and the current manufacturer specification.

Question: Is SikaGrout-300 PT AU still a current product name?
Answer: Current; rename required.

Question: What should be checked before using SikaGrout-300 PT AU?
Answer: Confirm the current Technical Data Sheet, substrate preparation, water or component ratio, application range, working time, curing and any engineering requirements. This is a specialist post-tensioning grout. Installation, testing, equipment and acceptance requirements must follow the project specification and current Sika TDS.

Question: Can I buy SikaGrout-300 PT AU in Perth?
Answer: Contact Safari Group in Canning Vale, Perth, to confirm the exact stocked variant, pack size and availability for your WA project. Bring the specification and required quantity so the team can help check product suitability.