MasterCrete CI 5200 (formerly MasterEmaco N 5200 CI) is a fast-setting, polymer-modified, fibre-reinforced lightweight concrete repair mortar with corrosion inhibition. It is aimed at contractors, builders and maintenance teams who need a clearly specified product rather than a generic cement or grout substitute. Safari Group can assist with supply enquiries from Canning Vale for projects across Perth and regional Western Australia.

Typical applications
• vertical and overhead concrete repairs
• balcony edges, facades and precast panels
• repair and levelling from about 3–100 mm depending on orientation

Why consider MasterCrete CI 5200 (formerly MasterEmaco N 5200 CI)
• active corrosion inhibition
• high-build, non-slump application
• fairing and patch repair in one product

Product selection should start with the required application, substrate condition, section depth, exposure, finish and project specification. Prepare the substrate carefully and use clean equipment and measured water. Mixing, priming, placement, curing and return-to-service requirements should always follow the current Australian Technical Data Sheet. Perth temperatures can shorten working time, so store materials appropriately and plan mixing and placement before opening bags or packs.

Important: Repair depth varies by orientation and substrate. Follow the current Master Builders Solutions TDS for reinforcement treatment, priming, build and curing.

Contact Safari Group in Canning Vale to confirm current pack size, stock availability and the latest technical documents. For a faster recommendation, provide the project specification, estimated quantity, substrate, required thickness or gap, application method and site conditions. Where the work is structural, safety-critical or subject to an engineering specification, obtain approval from the project engineer before substituting products or changing the installation method.

FAQ’s

Question: What is MasterCrete CI 5200 (formerly MasterEmaco N 5200 CI) used for?
Answer: MasterCrete CI 5200 (formerly MasterEmaco N 5200 CI) is used for vertical and overhead concrete repairs, balcony edges, facades and precast panels, repair and levelling from about 3–100 mm depending on orientation. Suitability depends on the substrate, required depth or gap, exposure and the current manufacturer specification.

Question: Is MasterCrete CI 5200 (formerly MasterEmaco N 5200 CI) still a current product name?
Answer: Renamed current product. Rename to “MasterCrete CI 5200”.

Question: What should be checked before using MasterCrete CI 5200 (formerly MasterEmaco N 5200 CI)?
Answer: Confirm the current Technical Data Sheet, substrate preparation, water or component ratio, application range, working time, curing and any engineering requirements. Repair depth varies by orientation and substrate. Follow the current Master Builders Solutions TDS for reinforcement treatment, priming, build and curing.

Question: Can I buy MasterCrete CI 5200 (formerly MasterEmaco N 5200 CI) in Perth?
Answer: Contact Safari Group in Canning Vale, Perth, to confirm the exact stocked variant, pack size and availability for your WA project. Bring the specification and required quantity so the team can help check product suitability.