MasterCrete 5140 (formerly MasterEmaco N 5100) is a polymer-modified thin-layer fairing mortar for concrete surface correction. It is aimed at contractors, builders and maintenance teams who need a clearly specified product rather than a generic cement or grout substitute. Safari Group can assist with supply enquiries from Canning Vale for projects across Perth and regional Western Australia.

Typical applications
• filling pinholes and honeycombing
• levelling uneven concrete surfaces
• thin resurfacing before coatings

Why consider MasterCrete 5140 (formerly MasterEmaco N 5100)
• strong adhesion to prepared concrete
• smooth fair-faced finish
• suited to shallow non-structural correction

Product selection should start with the required application, substrate condition, section depth, exposure, finish and project specification. Prepare the substrate carefully and use clean equipment and measured water. Mixing, priming, placement, curing and return-to-service requirements should always follow the current Australian Technical Data Sheet. Perth temperatures can shorten working time, so store materials appropriately and plan mixing and placement before opening bags or packs.

Important: This is a fairing mortar, not a structural reinstatement product. Confirm the replacement, application thickness and system components against the current TDS.

Contact Safari Group in Canning Vale to confirm current pack size, stock availability and the latest technical documents. For a faster recommendation, provide the project specification, estimated quantity, substrate, required thickness or gap, application method and site conditions. Where the work is structural, safety-critical or subject to an engineering specification, obtain approval from the project engineer before substituting products or changing the installation method.

FAQ’s

Question: What is MasterCrete 5140 (formerly MasterEmaco N 5100) used for?
Answer: MasterCrete 5140 (formerly MasterEmaco N 5100) is used for filling pinholes and honeycombing, levelling uneven concrete surfaces, thin resurfacing before coatings. Suitability depends on the substrate, required depth or gap, exposure and the current manufacturer specification.

Question: Is MasterCrete 5140 (formerly MasterEmaco N 5100) still a current product name?
Answer: Renamed / replacement requires stock confirmation. Current Master Builders Solutions range lists MasterCrete 5140 as a cementitious polymer-modified thin-layer fairing mortar.

Question: What should be checked before using MasterCrete 5140 (formerly MasterEmaco N 5100)?
Answer: Confirm the current Technical Data Sheet, substrate preparation, water or component ratio, application range, working time, curing and any engineering requirements. This is a fairing mortar, not a structural reinstatement product. Confirm the replacement, application thickness and system components against the current TDS.

Question: Can I buy MasterCrete 5140 (formerly MasterEmaco N 5100) in Perth?
Answer: Contact Safari Group in Canning Vale, Perth, to confirm the exact stocked variant, pack size and availability for your WA project. Bring the specification and required quantity so the team can help check product suitability.