Patch & Anchor is a fast-setting, non-shrink polymer-modified patching and anchoring compound. It is aimed at contractors, builders and maintenance teams who need a clearly specified product rather than a generic cement or grout substitute. Safari Group can assist with supply enquiries from Canning Vale for projects across Perth and regional Western Australia.

Typical applications
• patching concrete, render, brick and blockwork
• anchoring bolts and fittings in masonry
• fast local repairs to cementitious surfaces

Why consider Patch & Anchor
• high bond and early strength
• low water absorption when set
• chloride-free formulation

Product selection should start with the required application, substrate condition, section depth, exposure, finish and project specification. Prepare the substrate carefully and use clean equipment and measured water. Mixing, priming, placement, curing and return-to-service requirements should always follow the current Australian Technical Data Sheet. Perth temperatures can shorten working time, so store materials appropriately and plan mixing and placement before opening bags or packs.

Important: Confirm hole geometry, load requirements and installation method before anchoring. Structural or safety-critical anchors may require an engineered anchoring system.

Contact Safari Group in Canning Vale to confirm current pack size, stock availability and the latest technical documents. For a faster recommendation, provide the project specification, estimated quantity, substrate, required thickness or gap, application method and site conditions. Where the work is structural, safety-critical or subject to an engineering specification, obtain approval from the project engineer before substituting products or changing the installation method.

FAQ’s

Question: What is Patch & Anchor used for?
Answer: Patch & Anchor is used for patching concrete, render, brick and blockwork, anchoring bolts and fittings in masonry, fast local repairs to cementitious surfaces. Suitability depends on the substrate, required depth or gap, exposure and the current manufacturer specification.

Question: Is Patch & Anchor still a current product name?
Answer: Current;

Question: What should be checked before using Patch & Anchor?
Answer: Confirm the current Technical Data Sheet, substrate preparation, water or component ratio, application range, working time, curing and any engineering requirements. Confirm hole geometry, load requirements and installation method before anchoring. Structural or safety-critical anchors may require an engineered anchoring system.

Question: Can I buy Patch & Anchor in Perth?
Answer: Contact Safari Group in Canning Vale, Perth, to confirm the exact stocked variant, pack size and availability for your WA project. Bring the specification and required quantity so the team can help check product suitability.