Level Floor Standard is a resin-modified, fast-setting cement-based floor underlay and repair screed. It is aimed at contractors, builders and maintenance teams who need a clearly specified product rather than a generic cement or grout substitute. Safari Group can assist with supply enquiries from Canning Vale for projects across Perth and regional Western Australia.

Typical applications
• levelling interior concrete floors
• underlay below tiles and timber floors
• feather-edge repairs and local filling

Why consider Level Floor Standard
• smooth, high-fluidity placement
• feather edge to 50 mm
• rapid set and low VOC

Product selection should start with the required application, substrate condition, section depth, exposure, finish and project specification. Prepare the substrate carefully and use clean equipment and measured water. Mixing, priming, placement, curing and return-to-service requirements should always follow the current Australian Technical Data Sheet. Perth temperatures can shorten working time, so store materials appropriately and plan mixing and placement before opening bags or packs.

Important: Use indoors unless the current TDS says otherwise. Confirm moisture, primer, substrate and floor-covering requirements before installation.

Contact Safari Group in Canning Vale to confirm current pack size, stock availability and the latest technical documents. For a faster recommendation, provide the project specification, estimated quantity, substrate, required thickness or gap, application method and site conditions. Where the work is structural, safety-critical or subject to an engineering specification, obtain approval from the project engineer before substituting products or changing the installation method.

FAQ’s

Question: What is Level Floor Standard used for?
Answer: Level Floor Standard is used for levelling interior concrete floors, underlay below tiles and timber floors, feather-edge repairs and local filling. Suitability depends on the substrate, required depth or gap, exposure and the current manufacturer specification.

Question: Is Level Floor Standard still a current product name?
Answer: Current;

Question: What should be checked before using Level Floor Standard?
Answer: Confirm the current Technical Data Sheet, substrate preparation, water or component ratio, application range, working time, curing and any engineering requirements. Use indoors unless the current TDS says otherwise. Confirm moisture, primer, substrate and floor-covering requirements before installation.

Question: Can I buy Level Floor Standard in Perth?
Answer: Contact Safari Group in Canning Vale, Perth, to confirm the exact stocked variant, pack size and availability for your WA project. Bring the specification and required quantity so the team can help check product suitability.