Conbextra C is a dual shrinkage-compensated, high-flow cementitious grout for 10–100 mm gaps. It is aimed at contractors, builders and maintenance teams who need a clearly specified product rather than a generic cement or grout substitute. Safari Group can assist with supply enquiries from Canning Vale for projects across Perth and regional Western Australia.

Typical applications
• machine and structural steel baseplates
• precast concrete and blockwork voids
• flowable or trowel-applied grouting

Why consider Conbextra C
• high ultimate strength
• low permeability for durability
• adjustable placement consistency

Product selection should start with the required application, substrate condition, section depth, exposure, finish and project specification. Prepare the substrate carefully and use clean equipment and measured water. Mixing, priming, placement, curing and return-to-service requirements should always follow the current Australian Technical Data Sheet. Perth temperatures can shorten working time, so store materials appropriately and plan mixing and placement before opening bags or packs.

Important: Confirm water addition, consistency, formwork and curing from the current Fosroc TDS. Do not extend the stated gap range without manufacturer advice.

Contact Safari Group in Canning Vale to confirm current pack size, stock availability and the latest technical documents. For a faster recommendation, provide the project specification, estimated quantity, substrate, required thickness or gap, application method and site conditions. Where the work is structural, safety-critical or subject to an engineering specification, obtain approval from the project engineer before substituting products or changing the installation method.

FAQ’s

Question: What is Conbextra C used for?

Answer: Conbextra C is used for machine and structural steel baseplates, precast concrete and blockwork voids, flowable or trowel-applied grouting. Suitability depends on the substrate, required depth or gap, exposure and the current manufacturer specification.

Question: Is Conbextra C still a current product name?
Answer: Current product.

Question: What should be checked before using Conbextra C?
Answer: Confirm the current Technical Data Sheet, substrate preparation, water or component ratio, application range, working time, curing and any engineering requirements. Confirm water addition, consistency, formwork and curing from the current Fosroc TDS. Do not extend the stated gap range without manufacturer advice.

Question: Can I buy Conbextra C in Perth?
Answer: Contact Safari Group in Canning Vale, Perth, to confirm the exact stocked variant, pack size and availability for your WA project. Bring the specification and required quantity so the team can help check product suitability.

‍ ‍> Click Here For Conbextra C Technical Data Sheet <