Cockburn Brickies Grey is a cement-and-hydrated-lime blend for M3 grey masonry mortar. It is aimed at contractors, builders and maintenance teams who need a clearly specified product rather than a generic cement or grout substitute. Safari Group can assist with supply enquiries from Canning Vale for projects across Perth and regional Western Australia.

Typical applications
• grey bricklaying mortar
• blockwork and general masonry
• non-coastal work where M3 mortar is specified

Why consider Cockburn Brickies Grey
• pre-proportioned binder blend
• workable mortar consistency
• consistent grey appearance

Product selection should start with the required application, substrate condition, section depth, exposure, finish and project specification. Prepare the substrate carefully and use clean equipment and measured water. Mixing, priming, placement, curing and return-to-service requirements should always follow the current Australian Technical Data Sheet. Perth temperatures can shorten working time, so store materials appropriately and plan mixing and placement before opening bags or packs.

Important: This product is not intended for concrete. Coastal exposure can require M4 mortar; confirm the project specification and AS 3700 requirements.

Contact Safari Group in Canning Vale to confirm current pack size, stock availability and the latest technical documents. For a faster recommendation, provide the project specification, estimated quantity, substrate, required thickness or gap, application method and site conditions. Where the work is structural, safety-critical or subject to an engineering specification, obtain approval from the project engineer before substituting products or changing the installation method.

FAQ’s

Question: What is Cockburn Brickies Grey used for?
Answer: Cockburn Brickies Grey is used for grey bricklaying mortar, blockwork and general masonry, non-coastal work where M3 mortar is specified. Suitability depends on the substrate, required depth or gap, exposure and the current manufacturer specification.

Question: Is Cockburn Brickies Grey still a current product name?
Answer: Current product.

Question: What should be checked before using Cockburn Brickies Grey?
Answer: Confirm the current Technical Data Sheet, substrate preparation, water or component ratio, application range, working time, curing and any engineering requirements. This product is not intended for concrete. Coastal exposure can require M4 mortar; confirm the project specification and AS 3700 requirements.

Question: Can I buy Cockburn Brickies Grey in Perth?
Answer: Contact Safari Group in Canning Vale, Perth, to confirm the exact stocked variant, pack size and availability for your WA project. Bring the specification and required quantity so the team can help check product suitability.

Download a technical datasheet here Brickies Grey Datasheet‍ ‍