Cement Australia Rapid Set Concrete is a 20 kg rapid-hardening premixed concrete for non-structural post setting. It is aimed at contractors, builders and maintenance teams who need a clearly specified product rather than a generic cement or grout substitute. Safari Group can assist with supply enquiries from Canning Vale for projects across Perth and regional Western Australia.

Typical applications
• fence and non-load-bearing pergola posts
• clothes hoists and small uprights
• small jobs where rapid hardening helps

Why consider Cement Australia Rapid Set Concrete
• no separate mixing required
• initial hardening occurs quickly
• supports may be removed from about one hour under suitable conditions

Product selection should start with the required application, substrate condition, section depth, exposure, finish and project specification. Prepare the substrate carefully and use clean equipment and measured water. Mixing, priming, placement, curing and return-to-service requirements should always follow the current Australian Technical Data Sheet. Perth temperatures can shorten working time, so store materials appropriately and plan mixing and placement before opening bags or packs.

Important: Not for structural applications. Temperature affects set time; follow the current Cement Australia instructions and do not mix in a wheelbarrow or bucket.

Contact Safari Group in Canning Vale to confirm current pack size, stock availability and the latest technical documents. For a faster recommendation, provide the project specification, estimated quantity, substrate, required thickness or gap, application method and site conditions. Where the work is structural, safety-critical or subject to an engineering specification, obtain approval from the project engineer before substituting products or changing the installation method.

FAQ’s

Question: What is Cement Australia Rapid Set Concrete used for?
Answer: Cement Australia Rapid Set Concrete is used for fence and non-load-bearing pergola posts, clothes hoists and small uprights, small jobs where rapid hardening helps. Suitability depends on the substrate, required depth or gap, exposure and the current manufacturer specification.

Question: Is Cement Australia Rapid Set Concrete still a current product name?
Answer: Current product.

Question: What should be checked before using Cement Australia Rapid Set Concrete?
Answer: Confirm the current Technical Data Sheet, substrate preparation, water or component ratio, application range, working time, curing and any engineering requirements. Not for structural applications. Temperature affects set time; follow the current Cement Australia instructions and do not mix in a wheelbarrow or bucket.

Question: Can I buy Cement Australia Rapid Set Concrete in Perth?
Answer: Contact Safari Group in Canning Vale, Perth, to confirm the exact stocked variant, pack size and availability for your WA project. Bring the specification and required quantity so the team can help check product suitability.