Bostik Flowfill Grout GP is a general-purpose Class A non-shrink cementitious construction grout. It is aimed at contractors, builders and maintenance teams who need a clearly specified product rather than a generic cement or grout substitute. Safari Group can assist with supply enquiries from Canning Vale for projects across Perth and regional Western Australia.

Typical applications
• baseplates and machinery installations
• anchor bolts and precast components
• general void filling and grouting

Why consider Bostik Flowfill Grout GP
• adjustable stiff to flowable consistency
• controlled expansion in the plastic state
• ready-to-use dry blend

Product selection should start with the required application, substrate condition, section depth, exposure, finish and project specification. Prepare the substrate carefully and use clean equipment and measured water. Mixing, priming, placement, curing and return-to-service requirements should always follow the current Australian Technical Data Sheet. Perth temperatures can shorten working time, so store materials appropriately and plan mixing and placement before opening bags or packs.

Important: Use the current Australian Bostik TDS for thickness, water and curing. “Non-shrink” does not mean the product is suitable for every structural or precision grout application.

Contact Safari Group in Canning Vale to confirm current pack size, stock availability and the latest technical documents. For a faster recommendation, provide the project specification, estimated quantity, substrate, required thickness or gap, application method and site conditions. Where the work is structural, safety-critical or subject to an engineering specification, obtain approval from the project engineer before substituting products or changing the installation method.

FAQ’s

Question: What is Bostik Flowfill Grout GP used for?
Answer: Bostik Flowfill Grout GP is used for baseplates and machinery installations, anchor bolts and precast components, general void filling and grouting. Suitability depends on the substrate, required depth or gap, exposure and the current manufacturer specification.

Question: Is Bostik Flowfill Grout GP still a current product name?
Answer: Current;

Question: What should be checked before using Bostik Flowfill Grout GP?
Answer: Confirm the current Technical Data Sheet, substrate preparation, water or component ratio, application range, working time, curing and any engineering requirements. Use the current Australian Bostik TDS for thickness, water and curing. “Non-shrink” does not mean the product is suitable for every structural or precision grout application.

Question: Can I buy Bostik Flowfill Grout GP in Perth?
Answer: Contact Safari Group in Canning Vale, Perth, to confirm the exact stocked variant, pack size and availability for your WA project. Bring the specification and required quantity so the team can help check product suitability.