ARDEX CE 903
ARDEX CE 903
Ultra-Highly Fluid Cement Injection Grout
ARDEX CE 903 is an ultra-highly fluid, low-bleed and non-segregating cement injection grout designed for a wide range of civil engineering applications.
ARDEX CE 903 is formulated for demanding injection applications where superior penetration into tight joints, fissures and pores is required.
Its highly fluid characteristics allow the grout to penetrate difficult and confined areas, helping create a watertight grouted rock or soil mass.
With a long pump life, long-term durability and no requirement for additional admixtures, ARDEX CE 903 provides a practical high-performance solution for specialist injection grouting applications.
Available for Pickup & Delivery in Perth & Throughout Western Australia
We have ARDEX CE 903 available for pickup and delivery across Perth and throughout Western Australia.
ARDEX CE 903 is suitable for civil contractors, geotechnical contractors, tunnelling contractors, infrastructure specialists and construction professionals requiring a highly fluid cement injection grout.
Contact us today for availability, pricing, pickup and delivery options.
ARDEX CE 903 Advantages
Ultra-high fluidity – designed for superior penetration into tight and difficult areas.
Low bleed – helps maintain grout consistency during and after injection.
No segregation – designed to maintain a uniform grout mixture.
Long pump life – suitable for demanding injection applications requiring extended pumping time.
Long-term durability – designed for permanent civil engineering applications.
No admixtures required – formulated to provide its performance characteristics without additional admixtures.
Superior penetration – designed to penetrate tight joints, fissures and pores.
Watertight grouted mass – suitable for creating a watertight grouted rock or soil mass.
Civil engineering applications – suitable for a broad range of specialist injection grouting requirements.
Cement Injection Grout for Civil Engineering
ARDEX CE 903 is designed specifically for cement injection grouting applications where high fluidity and penetration are critical.
The grout can penetrate into tight joints, fissures and pores, helping fill voids and discontinuities within suitable rock and soil structures.
Its low-bleed, non-segregating formulation helps maintain a consistent grout during injection and supports uniform filling of the treated area.
Superior Penetration into Tight Joints & Fissures
One of the key benefits of ARDEX CE 903 is its ultra-high fluidity.
This allows the grout to penetrate into areas that may be difficult to access using conventional, less-fluid grouts.
ARDEX CE 903 is designed for penetration into:
Tight joints
Fissures
Small pores
Fine discontinuities
Confined spaces
Suitable rock and soil structures
This makes it particularly suited to specialist civil engineering and geotechnical injection applications.
Watertight Grouted Rock & Soil Mass
ARDEX CE 903 is designed to help produce a watertight grouted rock or soil mass.
By penetrating suitable joints, fissures and pores, the grout can help fill discontinuities and reduce pathways for water movement.
This makes the product suitable for applications where controlling water penetration and improving the integrity of a grouted mass are important project requirements.
No Bleed & No Segregation
ARDEX CE 903 is formulated to provide:
Low bleed
The grout is designed to minimise bleeding during injection and placement, helping maintain a consistent cementitious mixture.
Zero segregation
ARDEX CE 903 is designed with no segregation, helping maintain uniformity throughout the injection process.
These characteristics are particularly important for injection grouting, where consistent grout performance and penetration are required.
Long Pump Life
ARDEX CE 903 provides a long pump life, making it suitable for demanding injection projects where grout may need to be pumped over extended periods.
This can provide additional flexibility for larger civil engineering and geotechnical projects involving complex injection requirements.
Always follow the manufacturer's current technical documentation for mixing, pumping, injection pressure and application requirements.
No Admixtures Required
ARDEX CE 903 is designed to achieve its specified performance characteristics without requiring additional admixtures.
This provides a straightforward grout system for suitable injection applications while reducing the need for additional components during mixing.
Always follow the manufacturer's current instructions regarding mixing ratios, equipment and application procedures.
Long-Term Durability
ARDEX CE 903 is designed to provide long-term durability for civil engineering applications.
Its combination of high fluidity, low bleed and non-segregating characteristics helps support consistent grout placement, while the cured grout provides a durable cementitious mass.
Civil Engineering & Injection Applications
ARDEX CE 903 is suitable for a broad range of civil engineering, geotechnical and injection grouting applications.
Potential applications include:
Cement injection grouting
Rock grouting
Soil grouting
Filling tight joints
Filling fissures
Filling pores and fine discontinuities
Watertight grouting applications
Civil infrastructure projects
Geotechnical injection applications
Specialist groundwater control applications
The specific suitability of ARDEX CE 903 should always be assessed against the project requirements and the manufacturer's current technical documentation.
Technical Information
PropertySpecificationProductARDEX CE 903TypeCement injection groutFluidityUltra-highly fluidBleedingLow bleedSegregationNo segregationPump LifeLong pump lifeAdmixturesNo admixtures requiredDurabilityLong-term durabilityPenetrationSuitable for tight joints, fissures and poresPrimary ApplicationsCivil engineering and injection grouting
Specialist Injection Grouting Solution
ARDEX CE 903 is designed for projects where grout penetration and consistency are critical.
Its combination of ultra-high fluidity, long pump life and zero segregation makes it suitable for demanding injection applications where the grout needs to travel into fine discontinuities and confined areas.
The product is particularly suited to professional civil engineering and geotechnical applications requiring a durable, watertight grouted mass.
ARDEX CE 903 Perth & Western Australia
Looking for ARDEX CE 903 in Perth?
We have ARDEX CE 903 available for pickup in Perth, with delivery available throughout Western Australia.
We supply specialist civil engineering and injection grouting products to civil contractors, geotechnical contractors, infrastructure specialists, tunnelling contractors and other professional customers.
Order ARDEX CE 903
Need an ultra-highly fluid cement injection grout for tight joints, fissures and pores?
Contact us today for ARDEX CE 903 availability, pricing and delivery options.
Ultra-Highly Fluid | Zero Bleed & Segregation | Long Pump Life | Civil Engineering | Perth Pickup | Delivery Throughout Western Australia
Frequently Asked Questions
What is ARDEX CE 903?
ARDEX CE 903 is an ultra-highly fluid cement injection grout designed for civil engineering and demanding injection applications.
What is ARDEX CE 903 used for?
ARDEX CE 903 is designed for injection applications requiring penetration into tight joints, fissures and pores, helping produce a watertight grouted rock or soil mass.
Is ARDEX CE 903 suitable for rock grouting?
Yes. ARDEX CE 903 is suitable for appropriate rock injection and grouting applications, particularly where penetration into tight joints and fissures is required.
Can ARDEX CE 903 be used for soil grouting?
ARDEX CE 903 is designed for civil engineering injection applications and can be suitable for soil grouting applications, subject to project requirements and technical assessment.
Is ARDEX CE 903 highly fluid?
Yes. ARDEX CE 903 is ultra-highly fluid, allowing it to penetrate tight joints, fissures and pores.
Does ARDEX CE 903 segregate?
No. ARDEX CE 903 is designed for zero segregation, helping maintain a consistent grout mixture during injection.
Does ARDEX CE 903 bleed?
ARDEX CE 903 is designed as a low-bleed injection grout, helping minimise separation during placement.
Does ARDEX CE 903 require additional admixtures?
No. ARDEX CE 903 is designed to be used without additional admixtures.
Does ARDEX CE 903 have a long pump life?
Yes. A long pump life is one of the key features of ARDEX CE 903, making it suitable for demanding injection applications.
Where can I buy ARDEX CE 903 in Western Australia?
ARDEX CE 903 is available for pickup in Perth and delivery throughout Western Australia. Contact us for current availability, pricing and delivery options.